null

FREE Standard Shipping on US orders $100+

Give $50, Get $50 when you Refer a Friend! Learn More

$10 off $100+, Use Code: NEWYEAR10

$50 off $250+, Use Code: NEWYEAR50

  
DAYS
:
  
HOURS
:
  
MINUTES
:
  
SECONDS
Shop Now >

Product Methods

Methods

How To Apply

Apply I-Tip bonds strand-by-strand to client’s natural hair with color matching Protubes (beads). Full head application can take 3-5 hours.

Tools Needed:

  • Pro Pulling Needle or Wire Loop Needle
  • Pro Tubes or Silicone-lined Pro Tubes
  • Pro Closer

Advantages

  • Natural hair movement
  • Lightweight
  • Ponytail friendly
  • No heat
  • No adhesive
  • Hair is reusable if proper maintenance is preformed

Things To Consider

  • Full head application can take 3-5 hours
  • The Protube used to bond the I-Tip to natural hair may discolor over time

Special Maintenance

  • Less is more! Less heat = less damage. Style with a heat protectant up to 350 °F
  • Use a Loop Brush to detangle roots without snagging the bonds
  • Avoid applying conditioner or oils near bonds to prevent shedding

How Long They Stay On

8-10 weeks of wear per application

If proper care is taken, hair can be reused up to 3-4 times.

Quantity Needed for a Full Head

5-8 bundles. Quantity needed depends on desired finished look and natural hair density.

How To Apply

Apply Microtip bonds strand-by-strand to client’s natural hair with color matching Microtubes (micro beads). Targeted application can take 1-2 hours.

Tools Needed:

  • Pro Pulling Needle
  • Micro Tubes
  • Pro Closer

Advantages

  • Adds volume and coverage to thinning areas
  • Small, nearly undetectable bond
  • Natural hair movement
  • No heat or adhesive
  • Hair is reusable if proper maintenance is performed

Things To Consider

  • Targeted application can take 1-2 hours
  • Must be gentle with bonds as they are delicate

Special Maintenance

  • Less heat = less damage. Style with a heat protectant up to 350°F
  • Use a Loop Brush to detangle roots without snagging the bond
  • Avoid applying conditioner or oils near bonds to prevent shedding

How Long They Stay On

4-6 weeks of wear per application

If proper care is taken, hair can be reused up to 3-4 times.

Quantity Needed for a Full Head

1 bundle or less is needed for targeted application (150 strands).

How To Apply

Apply Keratip bonds strand-by-strand to client’s natural hair using professional adhesive and heat at 400°F. Full head application can take 3-5 hours.

Tools Needed:

  • Pro Fusion Tool (Small)
  • Keratip Powder
  • Plastic Heat Protector (10 Pack)

Advantages

  • Natural hair movement
  • Lightweight
  • Ponytail friendly
  • Transparent bond
  • Slip-free extension

Things To Consider

  • Full head application can take 3-5 hours
  • Hair is not reusable
  • Bonds are sensitive to heat and oil

Special Maintenance

  • Complete all chemical processes prior to application
  • Wait 48 hours to wash hair after application
  • Less is more! Less heat = less damage. Style with a heat protectant up to 350°F
  • Use a Loop Brush to detangle roots without snagging the bonds
  • Avoid applying conditioner or oils near bonds to prevent shedding
  • How Long They Stay On

    10-12 weeks of wear per application

    Not recommended for reuse.

    Quantity Needed for a Full Head

    5-8 bundles (150-300 strands). Quantity needed depends on desired finished look and natural hair density.

    How To Apply

    Apply Smart Tabs to client’s natural hair without heat using the Pro Tape-In Press. Full head application takes 30-45 minutes.

    Tools Needed:

    • Pro Tape-In Press

    Advantages

    • Easily blend colors and lengths
    • Flat and undetectable bond
    • Lightweight
    • No residue left on hair after removal

    Things To Consider

    • Slightly limited movement
    • Bonds are sensitive to heat and oil

    Special Maintenance

  • Complete all chemical processes prior to application
  • Must wait 48 hours to wash hair after application
  • Less is more! Less heat = less damage. Style with a heat protectant up to 350°F
  • Use a Loop Brush to detangle roots without snagging the bonds
  • Avoid applying conditioner or oils near bonds to prevent slipping
  • How Long They Stay On

    6-8 weeks of wear per application

    If proper care is taken, hair can be reused up to 3-4 times.

    Quantity Needed for a Full Head

    7-10 packs (21-30 sandwiches). Quantity needed depends on desired finished look and natural hair density.

    How To Apply

    Apply Skinweft Tape-Ins to client’s natural hair using a temperature controlled flat iron set to 290°F and lightly tapping the pieces together. Seal Skinwefts together with Pro Tape-In Press. Full head application takes 30-45 minutes.

    Tools Needed:

    • Flat iron
    • Pro Tape-In Press

    Advantages

    • Easily blend colors and lengths
    • Undetectable bond
    • Seamless and flexible
    • Lightweight

    Things To Consider

    • Slightly limited movement
    • The bond is sensitive to heat and oil

    Special Maintenance

  • Complete all chemical processes prior to application
  • Must wait 48 hours to wash hair after application
  • Less is more! Less heat = less damage. Style with a heat protectant up to 350°F
  • Use a Loop Brush to detangle roots without snagging the bonds
  • Avoid applying conditioner or oils near bonds to prevent slipping
  • How Long They Stay On

    6-8 weeks of wear per application

    If proper care is taken, hair can be reused up to 3-4 times.

    Quantity Needed for a Full Head

    6 packs (12 full sized sandwiches). Quantity needed depends on desired finished look and natural hair density.

    How To Apply

    Apply One-Step Weft by first sectioning the natural hair. Above the center tube, gather u-shaped section of the hair with Pro Pulling needle. Place the section of hair through looping tool holding tube in place. Pull looping tool downward through tube. Press tube flat with Pro Closer to lock into position.

    Tools Needed:

    • Pro Pulling Needle & Pro Closer

    Advantages

    • Pre-set sizing
    • Fast application
    • Easy installation
    • Voluminous, thick hair finished look

    Things To Consider

    • Tightening service is needed in between re-applications
    • Limited movement
    • Not ideal for ultra-fine hair density

    Special Maintenance

    • Tightening service is needed 4 weeks after initial application
    • Replace tubes when needed
    • Remove and re-apply after 8-10 weeks
    • Save looping tools for reuse
    • Less is more! Less heat = less damage. Style with a heat protectant up to 350 °F
    • Use a Loop Brush to detangle roots without snagging the bonds
    • Avoid applying conditioner or oils near bonds to prevent shedding

    How Long They Stay On

    8-10 weeks of wear per application

    If proper care is taken, hair can be reused up to 2 times.

    Quantity Needed for a Full Head

    2 packs (10 One-Step Wefts). Quantity needed depends on desired finished look and natural hair density.

    How To Apply

    Apply Clip Ins by sectioning hair and holding excess hair away with Shark Clips. Secure each clip attached to the weft onto your natural hair. Brush out hair to achieve a seamless blend between clip in hair extensions and natural hair. Style as desired. Full head application can take 10-20 minutes.

    Tools Needed:

    • Shark Clips

    Advantages

    • Professional installation not required
    • Easily change your look without commitment
    • Enjoy instant length and volume
    • Low maintenance hair extensions
    • Quick and easy application

    Things To Consider

    • Temporary hair extensions
    • Limited movement

    Special Maintenance

    • Less is more! Less heat = less damage. Style with a heat protectant up to 350 °F
    • Wash every 2-3 weeks or as needed
    • Use Style Mate for safely washing, styling, and storing Clip-Ins
    • Avoid conditioner near clips to prevent shedding
    • Do not sleep with Clip Ins in hair

    How Long They Stay On

    1 full day

    If proper care is taken, Clip Ins can last 6-12 months.

    Quantity Needed for a Full Head

    1-2 packs. Quantity needed depends on desired finished look and natural hair density.

    How To Apply

    Apply Wefts in the option that is best suited for your client including braid-in, sew-in, or attach with Protubes. Full head application can take 2-3 hours. Can also be custom made into clip-ins, wigs, or hairpieces.

    Tools Needed:

    • Depends on chosen application method

    Advantages

    • Customizable
    • Versatile
    • Voluminous, thick hair finished look

    Things To Consider

    • Full head application can take 2-3 hours
    • Tightening service is needed in between re-applications
    • Limited movement
    • Not ideal for ultra-fine hair density

    Special Maintenance

    • Tightening service is needed 4-6 weeks after initial application
    • Remove and re-apply after 8-10 weeks
    • Less is more! Less heat = less damage. Style with a heat protectant up to 350 °F
    • Use a Loop Brush to detangle roots without snagging the bonds
    • Avoid applying conditioner or oils near bonds to prevent shedding

    How Long They Stay On

    8-10 weeks of wear per application

    If proper care is taken, hair can be reused up to 3-4 times.

    Quantity Needed for a Full Head

    1-2 packs (85-170 grams). Quantity needed depends on desired finished look and natural hair density.